Nokia 1610 Secrets
*#06# - Check the IMEI (International Mobile Equipment Identity)
*#170602112302# - Show software version.
*#06# - Check the IMEI (International Mobile Equipment Identity)
*#170602112302# - Show software version.
*#06# - To view IMEI (International Mobile Equipment Identity) number enter
*#3283# - To view Week and Year of manufacture enter
The last two digits are the year. If the year is 95, the first two digits are the month.
For 96 the first two digits are the week of the year.
*#170602112302# or *#9999# - To view the software version on 2110e / 2110i
*#06# - Check the IMEI (International Mobile Equipment Identity)
*#7780# - Restore Factory Settings (Memory, language, counters not included)
*#3110# - Check the phone's software (SW) - called firmware revision information.
*#746025625# - To check if the Sim-Clock can be Stopped
(Sim-clock-stop is a kind of standby mode which will save battery time)
*#92702689# - Phone asks 'warranty code:'
Press for the following warranty code:
6232 (OK) : Displays the Month and Year of Manufacture
7332 (OK) : Displays the date of the last repair
7832 (OK) : Displays the date where the phone was purchased
9268 (OK) : Displays Serial Number
37832 (OK) : Set the Purchasing Date MMYY (Warning: You can only do this once - So be careful ...)
87267 (OK) : Transfers ALL phone numbers, pictures, sounds from one phone to another
*#06# - Check the IMEI (International Mobile Equipment Identity)
*#0000# - Show software version.
*#3370# - Enhanced Full Rate Codec (EFR) activation. It will automatically restart.
*#3370* - Enhanced Full Rate Codec (EFR) deactivation. It will automatically restart.
*#4720# - Half Rate Codec activation. It will automatically restart
*#4720* - Half Rate Codec deactivation. It will automatically restart
Enhanced Full Rate: will give you much better sound quality when you enable it. The new Enhanced Full Rate CODEC adopted by GSM uses the ASELP (AlgebraicCode Excitation Linear Prediction) compression technology. This technology allows for much great voice quality in the same number of bits as the older Full Rate CODEC. The older technology was called LPC-RPE (Linear Prediction Coding with Regular Pulse Excitation). Both operate at 13 kilobits.(but you take up more space on the network, so they can charge you more) - Talk-time is reduced with about 5%
Half Rate: will give you bad soundquality, which gives the serviceprovider the opportunity to have more calls on the network, and you might get a lower charge from them. - Will give you 30% longer talk-time.
*#746025625# - Sim clock stop. Only works for 3 minutes.
*#92702689# - Secret menu with 6 choices
1) Shows the serial number.
2) Shows when the phone was made mm/yy
3) Shows when the the phone was purchased mm/yy
4) Shows how many times the phone has been repaired.
5) Makes you capable of transferring user data if you have the gear for it
6) Shows how many hours the phone has been on
*#06# - Check the IMEI (International Mobile Equipment Identity)
*#3810# - Show software version.
*#06# - Check the IMEI (International Mobile Equipment Identity)
*#0000# - Check the phones software (SW) - called firmware revision information.
*#746025625# - To check if the Sim-Clock can be Stopped
(Sim-clock-stop is a kind of standby mode which will save battery time) This code doesn't work on SW version 4.59.
*#746025625# - Sim Clock Stop (Only works for 3 minutes)
*#92702689# - Warranty code.
Press the following warranty code:
6232 (OK) : Displays the Month and Year of Manufacture
7332 (OK) : Displays the date of the last repairment
7832 (OK) : Displays the date where the phone was purchased
9268 (OK) : Displays Serial Number
37832 (OK) : Set the Purchasing Date MMYY (Warning: You can only do this once - So be careful ...)
87267 (OK) : Transfers ALL phone numbers, pictures, sounds from one phone to another
Enhanced Full Rate Codec (EFR):
On: Enter *3370# and EFR will be activated after a reboot of the phone ( consumes more power )
Off: Enter #3370# and EFR will be switched off after a reboot of the phone.
Half Rate Codec:
On: Enter *4720# and Half Rate coded will be activated after a reboot of the phone ( better standby time )
Off: Enter #4720# and Half Rate coded will be de-activated after a reboot of the phone
Enhanced Full Rate will give you much better sound quality when you enable it. The new Enhanced Full Rate CODEC adopted by GSM uses the ASELP (AlgebraicCode Excitation Linear Prediction) compression technology. This technology allows for much great voice quality in the same number of bits as the older Full Rate CODEC. The older technology was called LPC-RPE (Linear Prediction Coding with Regular Pulse Excitation). Both operate at 13 kilobits.(but you take up more space on the network, so they can charge you more) - Talk-time is reduced with about 5%
Half Rate will give you bad soundquality, which gives the serviceprovider the opportunity to have more calls on the network, and you might get a lower charge from them. - Will give you 30% longer talk-time.
*#06# - Check the IMEI (International Mobile Equipment Identity)
*#0000# - Show software version.
*#06# - Check the IMEI (International Mobile Equipment Identity)
*#0000# - Show software version.
*#06# - Check the IMEI (International Mobile Equipment Identity)
*#0000# or try *#6110# - Check the phones software (SW) - called firmware revision information.
*#746025625# - On SW-Version 5.24 (only this version) you can check if the Sim-Clock can be Stopped with this code. (Sim-clock-stop is a kind of standby mode which will save battery time)
*#92702689# - Phone asks for Warranty code
Press the following warranty code:
6232 (OK) : Displays the Month and Year of Manufacture
7332 (OK) : Displays the date of the last repairment
7832 (OK) : Displays the date where the phone was purchased
9268 (OK) : Displays Serial Number
37832 (OK) : Set the Purchasing Date MMYY (Warning: You can only do this once - So be careful ...)
87267 (OK) : Transfers ALL phone numbers, pictures, sounds from one phone to another
Enhanced Full Rate Codec (EFR):
On: Enter *3370# and EFR will be activated after a reboot of the phone ( consumes more power )
Off: Enter #3370# and EFR will be switched off after a reboot of the phone.
Half Rate Codec:
On: Enter *4720# and Half Rate coded will be activated after a reboot of the phone ( better standby time )
Off: Enter #4720# and Half Rate coded will be de-activated after a reboot of the phone
Enhanced Full Rate will give you much better sound quality when you enable it. The new Enhanced Full Rate CODEC adopted by GSM uses the ASELP (AlgebraicCode Excitation Linear Prediction) compression technology. This technology allows for much great voice quality in the same number of bits as the older Full Rate CODEC. The older technology was called LPC-RPE (Linear Prediction Coding with Regular Pulse Excitation). Both operate at 13 kilobits.(but you take up more space on the network, so they can charge you more) - Talk-time is reduced with about 5%
Half Rate will give you bad sound quality, which gives the service provider the opportunity to have more calls on the network, and you might get a lower charge from them. It will also give you 30% longer talk-time.
FREE CALLS??
NOTE: The tips needs Net Monitor enabled.
Be aware that the trick will remove Netmonitor in some SW versions like v4.73, v5.04 and v5.24.
1 Launch the NetMonitor in your Nokia 51xx / 61xx
2 Execute the test number 497
3 Free calling for about 90 sec should now have been activated.
*#92772689# - Check ISDN number
*3001#12345# - Field test mode
*#9999# - Show Software version.
*#06# - Check the IMEI (International Mobile Equipment Identity)
*#0000# - Show software version.
*#92702689# - To enter service menu.
More information is also available on the 6110
*#92772689# - Check ISDN number
*3001#12345# - Field test mode
*#9999# - Show Software version.
*#92772689# - Check ISDN number
*3001#12345# - Field test mode
*#9999# - Show Software version.
*#06# - Check the IMEI (International Mobile Equipment Identity)
*#6190# - Shows software version.
*#92772689# - Show service menu. (after removing the analogue module)
*3001#12345 - Enter test mode.
*#639# - To change NAM.
*#06# - Check the IMEI (International Mobile Equipment Identity)
*#0000# - Check the phones software (SW) - called firmware revision information.
*#746025625# - To check if the Sim-Clock can be Stopped
(Sim-clock-stop is a kind of standby mode which will save battery time) This code doesn't work on SW version 4.59.
*#92702689# - Warranty code.
Press the following warranty code:
6232 (OK) : Displays the Month and Year of Manufacture
7332 (OK) : Displays the date of the last repairment
7832 (OK) : Displays the date where the phone was purchased
9268 (OK) : Displays Serial Number
37832 (OK) : Set the Purchasing Date MMYY (Warning: You can only do this once - So be careful ...)
87267 (OK) : Transfers ALL phone numbers, pictures, sounds from one phone to another
*#92702689# - Secret menu with 6 choices
1) Shows the serial number.
2) Shows when the phone was made mm/yy
3) Shows when the the phone was purchased mm/yy
4) Shows how many times the cell phone has been repaired.
5) Makes you capable of transferring user data if you have the gear for it.
6) Shows how many hours the phone has been on
*#06# - Check the IMEI (International Mobile Equipment Identity)
*#8110# - Check the phones software (SW) - called firmware revision information.
*#746025625# - To check if the Sim-Clock can be Stopped
(Sim-clock-stop is a kind of standby mode which will save battery time) This code doesn't work on SW version 4.59.
*#92702689# - Warranty code.
Press the following warranty code:
6232 (OK) : Displays the Month and Year of Manufacture
7332 (OK) : Displays the date of the last repairment
7832 (OK) : Displays the date where the phone was purchased
9268 (OK) : Displays Serial Number
37832 (OK) : Set the Purchasing Date MMYY (Warning: You can only do this once - So be careful ...)
87267 (OK) : Transfers ALL phone numbers, pictures, sounds from one phone to another
*#06# - Check the IMEI (International Mobile Equipment Identity)
*#0000# - Show software version.
*#92702689# - Phone asks for Warranty code.
Press the following warranty code:
6232 (OK) : Displays the Month and Year of Manufacture
7332 (OK) : Displays the date of the last repairment
7832 (OK) : Displays the date where the phone was purchased
9268 (OK) : Displays Serial Number
37832 (OK) : Set the Purchasing Date MMYY (Warning: You can only do this once - So be careful ...)
87267 (OK) : Transfers ALL phone numbers, pictures, sounds from one phone to another
*#06# - Check the IMEI (International Mobile Equipment Identity)
*#8110# - Check the phones software (SW) - called firmware revision information.
*#746025625# - To check if the Sim-Clock can be Stopped
(Sim-clock-stop is a kind of standby mode which will save battery time) This code doesn't work on SW version 4.59.
*#92702689# - Warranty code.
Press the following warranty code:
6232 (OK) : Displays the Month and Year of Manufacture
7332 (OK) : Displays the date of the last repairment
7832 (OK) : Displays the date where the phone was purchased
9268 (OK) : Displays Serial Number
37832 (OK) : Set the Purchasing Date MMYY (Warning: You can only do this once - So be careful ...)
87267 (OK) : Transfers ALL phone numbers, pictures, sounds from one phone to another
Enhanced Full Rate Codec (EFR):
On: Enter *3370# and EFR will be activated after a reboot of the phone ( consumes more power )
Off: Enter #3370# and EFR will be switched off after a reboot of the phone.
Enhanced Full Rate will give you much better sound quality when you enable it. The new Enhanced Full Rate CODEC adopted by GSM uses the ASELP (AlgebraicCode Excitation Linear Prediction) compression technology. This technology allows for much great voice quality in the same number of bits as the older Full Rate CODEC. The older technology was called LPC-RPE (Linear Prediction Coding with Regular Pulse Excitation). Both operate at 13 kilobits. (But you take up more space on the network, so they can charge you more) - Talk-time is reduced with about 5%
*#06# - Check the IMEI (International Mobile Equipment Identity)
*#0000# - Show software version.
*#06# - Check the IMEI (International Mobile Equipment Identity)
*#0000# - Show software version.
